Biomass boiler plant CIDERAL, France

We have equipped the small town Loudéac, located in Brittany on the coast of the Atlantic Ocean, with a 3 MW biomass boiler plant for district heating and local heating.

 The direct proximity with a wooded area (larger than 2500 ha) is a guarantee for an independent delivery of renewable energy. Furthermore this delivery is available at any time.

 The boiler plant contains 2 biomass boilers with a power of 1 MW/th and 2 MW/th and lends itself to the thermic use of natural wood.



Boiler plant Radenthein

The installation in Radenthein, Carinthia was commissioned right on time for the heating season 2014-2015.

 Radenthein is situated in the valley “Gegendtal”, in the north east of the lake “Milltaätter See” near the Nockberg. At the beginning of the 20th century, magnesite was extracted in open pits for the production of fire proof materials used in the steel and iron industry.

 A modern biomass installation for local and district heat, with a 1MW/th and a 0,5 MW/th boilers as well as a flue gas condensation, was installed. A renewable energy will now be provided and will supply the essential premises to the village on a long-term and reliable basis


Furnace 1MW/th and 0,5 MW/th in Radenthein, Carinthia

Installation Freyming

In collaboration with our customer Dalkia France, we have been developing a type of installation which is specially adapted for small towns and which can deliver energy from renewable resources in a very efficient way.



A standard installation with a power of 4 MW/th was installed in Freyming.


 Low planning expenses, quick assembling on site and quick instruction of the operating team, telemaintenance for an ideal functioning  have made this model practically a standard.


The first AGRO installations for heat and electricity production were commissioned in 2006. We had thus trodden a new and constructive paths. Our solution approach was “robust fuel logistics, appropriate for every biomass fuel, not complicated in operation, reliable for the heat and electricity production, minor maintenance requirements in spite of strict environmental protection constraints”. The numerous installations that we have commissioned in the last years have proved us right.

 Just an example:

 We installed the first cogeneration installation in 2006 for the sawmill Aurnhammer in Eigenzell, Germany. In the meantime this installation of 2.5 MW/th and 0.5 MW/el produced about 22 million kWh of electricity in 60.000 operating hours. The time of execution of the yearly service was excluded and no time for an exceptional reparation was necessary.

 Installations with a similar power, operating for more than 5 years (for example in Rasen, Italy with 45.000 operating hours and 28 million kWh) also show the quality standard and the performance of our technology.




We placed our order in 2006 for the cogeneration system with a power of 2500 kW/th and 500 kW/el in the company Agro Forst und Energietechnik GmbH.

 Our choice was motivated by the sophisticated technology and the excellent service provided by this company.

 The functioning of the installation as well as the economic returns have not only met our expectations. They have gone beyond!


 District and local heating installations must be started in October. Our warehouse gets gradually empty for the deliveries. Some installations, waiting to be transported, are to be seen on our warehouse, where the last controls are made.


Installations waiting for last control and dispatch